N Mud Pump Bearing For Varco 6/152.4 M/C9

B5:97 mm; G2:G 1/8; Hydraulic nut:HMV 120E; A:6.5 mm; d3:700 mm; B1:289 mm; d:600 mm; Locking device:MS 30/600-530; Lock nut:HM 30/600; B:75 mm;

P150°:33.4 kN; Stabilizing ring:SR-15-0; P120°:36.9 kN; H1:82.55 mm; H2:30.163 mm; A1:79.375 mm; da:63.5 mm; End plug (suffix Y):EPR 7; P60°:104 kN; Mass pillow block:14.3 kg;

Housing:SAF 532; RG:3/4 NPT; Eye bolt:2 x 3/8-16 UNC; P150°:78.3 kN; S:4.763 mm; L:558.8 mm; A1:158.75 mm; Initial grease fill:793.8 g; J max.:488.95 mm; N1:28.575 mm;

C:424 mm; D:650 mm; Mass bearing:454 kg; F:510 mm; K:9 mm; b:16.7 mm; r1,2 min.:12 mm; B:424 mm; r3,4 min.:3 mm; Fatigue load limit Pu:1530 kN;

Material constant KM:330; Design (sliding contact surface combination):Steel/steel, heavy-d; B:165 mm; b1:15.5 mm; D:430 mm; Da min.:371 mm; dk:375 mm; Specific dynamic load factor K:100 N/mm²; Mass plain bearing:78.5 kg; da min.:314 mm;

Housing:SAF 532; RG:3/4 NPT; Eye bolt:2 x 3/8-16 UNC; P150°:78.3 kN; S:4.763 mm; L:558.8 mm; A1:158.75 mm; Initial grease fill:793.8 g; J max.:488.95 mm; N1:28.575 mm;

Sleeve:S 138x7; d1:177.8 mm; G:189.789 mm; B1:171.399 mm; Threads per inch:8; d:190 mm; d3 max.:240.64 mm; B:28.829 mm; Mass adapter sleeve assembly:12.5 kg; Hydraulic nut:HMVC 38E;

Lock nut:AN 24; d:120 mm; B1:87.782 mm; Mass adapter sleeve assembly:3 kg; Sleeve:S 24x4; Hydraulic nut:HMVC 24E; B:20.904 mm; Threads per inch:12; d1:101.6 mm; d3 max.:155.702 mm;

Material constant KM:330; Design (sliding contact surface combination):Steel/steel, heavy-d; B:165 mm; b1:15.5 mm; D:430 mm; Da min.:371 mm; dk:375 mm; Specific dynamic load factor K:100 N/mm²; Mass plain bearing:78.5 kg; da min.:314 mm;

Material constant KM:330; Design (sliding contact surface combination):Steel/steel, heavy-d; B:165 mm; b1:15.5 mm; D:430 mm; Da min.:371 mm; dk:375 mm; Specific dynamic load factor K:100 N/mm²; Mass plain bearing:78.5 kg; da min.:314 mm;

Mass adapter sleeve assembly:14 kg; Hydraulic nut:HMV 40 E; B4:31.5 mm; B:29 mm; B1:176 mm; Locking device:MB 40; d:200 mm; d3:250 mm; d1:177.8 mm; G:M 200x3;

Oil Speed Rating Open/Shielded n2:8000 rpm; d:60.000 mm; Accessories:Snap-Ring; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:32500 N; D:95.0000 mm; Sealed Speed Rating n3:4300 rpm; B:18.00 mm; Basic Static Radial Load Rating Co:25000 N; Grease Speed Rating Open/Shielded n1:6700 rpm;

P150°:33.4 kN; Stabilizing ring:SR-15-0; P120°:36.9 kN; H1:82.55 mm; H2:30.163 mm; A1:79.375 mm; da:63.5 mm; End plug (suffix Y):EPR 7; P60°:104 kN; Mass pillow block:14.3 kg;

Basic dynamic load rating C:14 kN; s1:21 mm; Housing material:Composite; Da:74.6 mm; Basic static load rating C0:7.8 kN; Housing:FYK 505; Thread grub screw G2:M5; B1:33 mm; L:95 mm; Recommended tightening torque for grub screw:4.2 N·m;