NNAL 635 Q4/C9W33X Gas Bearing

Basic Static Radial Load Rating Co:20800 N; D:150.0000 mm; Oil Speed Rating n2:4800 rpm; B:28.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4000 rpm; d:85.000 mm; Basic Dynamic Radial Load Rating C:48800 N;

D1 ≈:500 mm; db min.:439 mm; Basic static load rating C0:3750 kN; Fatigue load limit Pu:320 kN; d:400 mm; r1,2 min.:4 mm; Limiting speed:1500 r/min; Limiting value e:0.3; Basic dynamic load rating C:1760 kN; Reference speed:1000 r/min;

G:M 150x2; Hydraulic nut:HMV 30 E; B1:104 mm; d:140 mm; G1:15 mm; d1:135 mm; Mass withdrawal sleeve:1.75 kg; Nut for removal:KM 30; B2:109 mm;

G:M 150x2; Hydraulic nut:HMV 30 E; B1:104 mm; d:140 mm; G1:15 mm; d1:135 mm; Mass withdrawal sleeve:1.75 kg; Nut for removal:KM 30; B2:109 mm;

D1 ≈:500 mm; db min.:439 mm; Basic static load rating C0:3750 kN; Fatigue load limit Pu:320 kN; d:400 mm; r1,2 min.:4 mm; Limiting speed:1500 r/min; Limiting value e:0.3; Basic dynamic load rating C:1760 kN; Reference speed:1000 r/min;

Pu:31.430 kN; D:170 mm; Static (Coa):282 kN; B:43 mm; b:mm; d2 (max):mm; E:mm; rs (min):2.1 mm; F:114 mm; Dynamic (Ca):233 kN;

G:M 150x2; Hydraulic nut:HMV 30 E; B1:104 mm; d:140 mm; G1:15 mm; d1:135 mm; Mass withdrawal sleeve:1.75 kg; Nut for removal:KM 30; B2:109 mm;

ba:46.831 mm; End plug (suffix Y):EPR 14; Cap bolt:5/8-11 UNC; da:104.775 mm; P90°:84.5 kN; P180°:57.4 kN; Da:180 mm; PG:1/4 NPT; Taconite seal:TER 112; H:222.25 mm;

Preload class D GD:1920 N; d2:70.8 mm; B:18 mm; ra max.:1 mm; Da max.:89 mm; Fatigue load limit Pu:1.4 kN; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor f2C:1.05; d:60 mm; Calculation factor f1:0.99;

G:M 150x2; Hydraulic nut:HMV 30 E; B1:104 mm; d:140 mm; G1:15 mm; d1:135 mm; Mass withdrawal sleeve:1.75 kg; Nut for removal:KM 30; B2:109 mm;

Basic static load rating C0:29 kN; B:18 mm; D1 ≈:65.45 mm; Reference speed:11000 r/min; Da max.:73 mm; Calculation factor e:0.68; ra max.:1 mm; d1 ≈:56.07 mm; rb max.:0.6 mm; Calculation factor Y2:0.87;

G:M 150x2; Hydraulic nut:HMV 30 E; B1:104 mm; d:140 mm; G1:15 mm; d1:135 mm; Mass withdrawal sleeve:1.75 kg; Nut for removal:KM 30; B2:109 mm;

Basic Static Radial Load Rating Co:20800 N; D:150.0000 mm; Oil Speed Rating n2:4800 rpm; B:28.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4000 rpm; d:85.000 mm; Basic Dynamic Radial Load Rating C:48800 N;

G:M 150x2; Hydraulic nut:HMV 30 E; B1:104 mm; d:140 mm; G1:15 mm; d1:135 mm; Mass withdrawal sleeve:1.75 kg; Nut for removal:KM 30; B2:109 mm;

Preload class D GD:1920 N; d2:70.8 mm; B:18 mm; ra max.:1 mm; Da max.:89 mm; Fatigue load limit Pu:1.4 kN; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor f2C:1.05; d:60 mm; Calculation factor f1:0.99;