Drilling Mud Pumps NU3040X3M/C4 Bearings

D:170.0000 mm; d:95.000 mm; Basic Dynamic Radial Load Rating C:159000 N; Fillet Radius ra:2.00 mm; B:55.60 mm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:146000 N; Grease Speed Rating n1:2200 rpm; Oil Speed Rating n2:3200 rpm; Sealed Speed Rating n3:2200 rpm;

Mass inner ring:0.3 kg; r, r1,2 min.:1 mm; d:80 mm; B:30 mm; F:90 mm;

b:10 mm; G:M 100x2; B:21 mm; B3:4 mm; d1:110 mm; Grub (set) screw size:M8; Mass lock nut:0.8 kg; h:4 mm; Axial static load carrying capacity:255 kN; Recommended grub screw tightening torque:18 N·m;

d1:400 mm; Hydraulic nut:HMV 84E; G3:9 mm; Lock nut:HM 3184; B5:90 mm; d3:540 mm; G2:M 6; G:Tr 420x5; Mass adapter sleeve assembly:80 kg; Locking device:MS 3184-80;

Oil Speed Rating n2:6300 rpm; Basic Static Radial Load Rating Co:39000 N; Grease Speed Rating n1:4800 rpm; Basic Dynamic Radial Load Rating C:48800 N; D:90.0000 mm; Accessories:Shield & Seal & Snap; Fillet Radius ra:1.00 mm; d:50.000 mm; B:30.20 mm; Sealed Speed Rating n3:4800 rpm;

H1:169.875 mm; P150°:78.3 kN; Cap bolt recommended tightening torque:203.4 N·m; Ca:113.817 mm; H:336.55 mm; Appropriate attachment bolt size G:1 in; Stabilizing ring:SR-32-0; Labyrinth ring:2 x LOR 130; A1:158.75 mm; Pa:49.8 kN;

d1:400 mm; Hydraulic nut:HMV 84E; G3:9 mm; Lock nut:HM 3184; B5:90 mm; d3:540 mm; G2:M 6; G:Tr 420x5; Mass adapter sleeve assembly:80 kg; Locking device:MS 3184-80;

Basic Static Radial Load Rating Co:140000 N; Basic Dynamic Radial Load Rating C:174000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; d:100.000 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Fillet Radius ra:2.50 mm; B:47.00 mm; Sealed Speed Rating n3:2100 rpm; Grease Speed Rating n1:3000 rpm; Oil Speed Rating n2:3600 rpm;

b:10 mm; G:M 100x2; B:21 mm; B3:4 mm; d1:110 mm; Grub (set) screw size:M8; Mass lock nut:0.8 kg; h:4 mm; Axial static load carrying capacity:255 kN; Recommended grub screw tightening torque:18 N·m;

d1:400 mm; Hydraulic nut:HMV 84E; G3:9 mm; Lock nut:HM 3184; B5:90 mm; d3:540 mm; G2:M 6; G:Tr 420x5; Mass adapter sleeve assembly:80 kg; Locking device:MS 3184-80;

Basic Interchange FAF:-; Old MRC Bearing Number:-; D:30.0000 mm; Fillet Radius ra:0.64 mm; Accessories:88000 Two Seals; Width - Inner Ring B1:16.40 mm; Basic Interchange NDH:88009; d:9.000 mm; Basic Interchange BCA:-; Speed Rating-Single and Double Sealed Grease SDG:17000 rpm;

J max.:368.3 mm; N1:22.225 mm; A1:120.65 mm; P60°:149 kN; Cap bolt:2 x 3/4-10 UNC; Stabilizing ring:2 x SR-1522; H:239.316 mm; Pa:12.5 kN; Adapter sleeve assembly:SNW 22x3.11/16; H1:125.425 mm;

Ca min.:8 mm; da max.:470 mm; B:73.025 mm; d1 ≈:506 mm; Calculation factor Y:1.15; Mass bearing:59 kg; Cb min.:25 mm; rb max.:6 mm; T:76.2 mm; Dimension series:EE 240000;

Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ max.:0.1; B:12 mm; Specific static load factor K0:20 N/mm²; D:11 mm; Permissible sliding velocity v max.:5 m/s; d:8 mm; Tolerance shaft:h8; Tolerance housing:H7; Coefficient of friction µ min.:0.05;

Mass inner ring:0.3 kg; r, r1,2 min.:1 mm; d:80 mm; B:30 mm; F:90 mm;