Drilling Mud Pumps NNAL 6/228.6 Q4/P69W33X Bearings

b:22 mm; B:76 mm; Basic dynamic load rating C:312 kN; da min.:225 mm; K:7.5 mm; Calculation factor X:0.62; Limiting speed:2000 r/min; D1 ≈:286 mm; ra max.:2.1 mm; D:309.5 mm;

Calculation factor A:0.0234; d1 ≈:80.19 mm; Basic static load rating C0:67 kN; Calculation factor X:0.67; r3,4 min.:1 mm; r1,2 min.:2 mm; rb max.:1 mm; Calculation factor Y2:0.87; Db max.:114 mm; Calculation factor Y0:0.38;

Width Plain C2:186000 N; d:90.000 mm; Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating 40º C1:199000 N; Basic Static Radial Load Rating 15º Co1:204000 N; B:86.00 mm; Grease Speed Rating n1:3000 rpm; Oil Speed Rating n2:4000 rpm; Shielded or Sealed Co2:160000 N;

B2:11 mm; B1:7 mm; Mass angle ring:0.16 kg; d1 ≈:94.4 mm; r3,4 min.:1.5 mm; d:75 mm;

Basic Static Radial Load Rating Co:34500 N; d:35.000 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:5600 rpm; Basic Dynamic Radial Load Rating C:49400 N; Accessories:Shield & Seal & Snap; Grease Speed Rating n1:5600 rpm; D:80.0000 mm; Oil Speed Rating n2:7500 rpm; B:34.90 mm;

R2:30.163 mm; R1:58.737 mm; N1:25.4 mm; Da:180 mm; Adapter sleeve assembly:SNW 3024x4.1/4; Bearing:23024 CCK/W33; PG:1/4 NPT; L:387.35 mm; Labyrinth ring:2 x LOR 114; Pa:16.7 kN;

C1 max.:22 mm; Material constant KM:330; l1 min.:68 mm; l2 max.:174 mm; dk:47 mm; l7 min.:40 mm; d2 max.:84 mm; α:6 °; B:25 mm; G:M 36x3;

C1 max.:22 mm; Material constant KM:330; l1 min.:68 mm; l2 max.:174 mm; dk:47 mm; l7 min.:40 mm; d2 max.:84 mm; α:6 °; B:25 mm; G:M 36x3;

C1 max.:22 mm; Material constant KM:330; l1 min.:68 mm; l2 max.:174 mm; dk:47 mm; l7 min.:40 mm; d2 max.:84 mm; α:6 °; B:25 mm; G:M 36x3;

H:98.5 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Limiting speed:9500 r/min; Db1:50 mm; J:76.5 mm; A1:11 mm; J7:11 mm; Bearing:YET 203-008; Housing material:Cast iron; Basic static load rating C0:4.75 kN;

s:25.4 mm; Attachment bolt diameter G:12.7 mm; Basic dynamic load rating C:73.8 kN; S:0.794 mm; H:100.013 mm; L:174.625 mm; J max.:139.7 mm; H1:47.625 mm; H2:30.163 mm; A1:72.231 mm;

C1 max.:22 mm; Material constant KM:330; l1 min.:68 mm; l2 max.:174 mm; dk:47 mm; l7 min.:40 mm; d2 max.:84 mm; α:6 °; B:25 mm; G:M 36x3;

b:22 mm; B:76 mm; Basic dynamic load rating C:312 kN; da min.:225 mm; K:7.5 mm; Calculation factor X:0.62; Limiting speed:2000 r/min; D1 ≈:286 mm; ra max.:2.1 mm; D:309.5 mm;

Oil Speed Rating n2:1600 rpm; Fillet Radius rb:1.00 mm; d:160.000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:850000 N; Grease Speed Rating n1:1200 rpm; D:340.0000 mm; Basic Dynamic Radial Load Rating C:553000 N; B:136.00 mm;