Drilling Mud Pumps 24036 CA/C3W33 Bearings

D:1360 mm; with tapered bore:190 min-1; rs (min):15 mm; B:475 mm; Oil:2222.410 kN; Pu:18990 kN; d:750 mm; Dynamic (Cr):12 mm; Grease:36950 kN; with cylindrical bore:150 min-1;

Da max.:505 mm; da max.:354 mm; Reference speed:800 r/min; Da min.:454 mm; rb max.:7 mm; Ca min.:10 mm; ra max.:7 mm; Basic static load rating C0:5600 kN; Db min.:510 mm; d1 ≈:416 mm;

Da max.:505 mm; da max.:354 mm; Reference speed:800 r/min; Da min.:454 mm; rb max.:7 mm; Ca min.:10 mm; ra max.:7 mm; Basic static load rating C0:5600 kN; Db min.:510 mm; d1 ≈:416 mm;

Static (Cor):22.3 mm; Pu:4250 kN; with cylindrical bore:560 min-1; Grease:7500 kN; Oil:571.310 kN; B:192 mm; d:360 mm; rs (min):5 mm; with tapered bore:700 min-1; Dynamic (Cr):12 mm;

H2:70 mm; Q150°:1040 kN; H:333 mm; da:163.512 mm; P55°:2100 kN; P120°:760 kN; H1:170 mm; P180°:850 kN; P90°:1000 kN; A1:180 mm;

db:100.013 mm; A1:88.9 mm; P60°:78.7 kN; Cap bolt, SAE grade:8; Bearing:22217 E; End plug (suffix Y):EPR 9; Lock washer:W 17; Cap bolt recommended tightening torque:298.3 N·m; Pa:20.5 kN; H:187.325 mm;

db:100.013 mm; A1:88.9 mm; P60°:78.7 kN; Cap bolt, SAE grade:8; Bearing:22217 E; End plug (suffix Y):EPR 9; Lock washer:W 17; Cap bolt recommended tightening torque:298.3 N·m; Pa:20.5 kN; H:187.325 mm;

Da max.:505 mm; da max.:354 mm; Reference speed:800 r/min; Da min.:454 mm; rb max.:7 mm; Ca min.:10 mm; ra max.:7 mm; Basic static load rating C0:5600 kN; Db min.:510 mm; d1 ≈:416 mm;

Basic static load rating C0:116 kN; Limiting speed:8000 r/min; Basic dynamic load rating C:41.3 kN; Fw:60 mm; Reference speed:7000 r/min; Mass needle roller and cage assembly:0.077 kg; Ew:65 mm; U:30 mm; Fatigue load limit Pu:14.3 kN;

D:1360 mm; with tapered bore:190 min-1; rs (min):15 mm; B:475 mm; Oil:2222.410 kN; Pu:18990 kN; d:750 mm; Dynamic (Cr):12 mm; Grease:36950 kN; with cylindrical bore:150 min-1;

Basic static load rating C0:116 kN; Limiting speed:8000 r/min; Basic dynamic load rating C:41.3 kN; Fw:60 mm; Reference speed:7000 r/min; Mass needle roller and cage assembly:0.077 kg; Ew:65 mm; U:30 mm; Fatigue load limit Pu:14.3 kN;

M:3 mm; r1 min.:0.6 mm; b1:4.6 mm; rb max.:1 mm; Specific static load factor K0:500 N/mm²; d1 ≈:57 mm; B:43 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; r2 min.:1 mm; dk:66 mm;

db:100.013 mm; A1:88.9 mm; P60°:78.7 kN; Cap bolt, SAE grade:8; Bearing:22217 E; End plug (suffix Y):EPR 9; Lock washer:W 17; Cap bolt recommended tightening torque:298.3 N·m; Pa:20.5 kN; H:187.325 mm;

Weight W:0.70 lb; Dimension J:0.3125 in; Dimension S1:0.7188 in; Shaft Diameter D:3/4 in; Dimension G:0.4375 in; Dimension N:0.7813 in; Basic Static Radial Load Rating Co:1470 lbf; Dimension D2:2.1875 in; Pin Dia A1:0.2500 in; Dimension H:0.8750 in;