Drilling Mud Pumps 24040/C3W33 Bearings

db:100.013 mm; A1:88.9 mm; P60°:78.7 kN; Cap bolt, SAE grade:8; Bearing:22217 E; End plug (suffix Y):EPR 9; Lock washer:W 17; Cap bolt recommended tightening torque:298.3 N·m; Pa:20.5 kN; H:187.325 mm;

Oil Speed Rating n2:5300 rpm; d:80.000 mm; Basic Static Radial Load Rating Co:71000 N; D:140.0000 mm; Basic Dynamic Radial Load Rating C:78000 N; Grease Speed Rating n1:4100 rpm; Fillet Radius ra:1.50 mm; B:26.00 mm;

B:34.00 mm; D:180.0000 mm; d:100.000 mm; Oil Speed Rating n2:4000 rpm; Basic Static Radial Load Rating Co:125000 N; Grease Speed Rating n1:3000 rpm; Basic Dynamic Radial Load Rating C:130000 N; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm;

Weight W:0.70 lb; Dimension J:0.3125 in; Dimension S1:0.7188 in; Shaft Diameter D:3/4 in; Dimension G:0.4375 in; Dimension N:0.7813 in; Basic Static Radial Load Rating Co:1470 lbf; Dimension D2:2.1875 in; Pin Dia A1:0.2500 in; Dimension H:0.8750 in;

Calculation factor fHC:1.02; Attainable speed for grease lubrication:43000 r/min; Static axial stiffness, preload class A:28 N/µm; da min.:28.2 mm; Da max.:43.8 mm; Preload class B GB:70 N; Preload class D GD:280 N; Static axial stiffness, preload class B:37 N/µm; Calculation factor f2B:1.02; D:47 mm;

B:34.00 mm; D:180.0000 mm; d:100.000 mm; Oil Speed Rating n2:4000 rpm; Basic Static Radial Load Rating Co:125000 N; Grease Speed Rating n1:3000 rpm; Basic Dynamic Radial Load Rating C:130000 N; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm;

Db max.:134.4 mm; Calculation factor f0:9.6; Number of balls z:28; Calculation factor f2A:1; Preload class B GB:580 N; ra max.:1.5 mm; Fatigue load limit Pu:1.27 kN; D1:121.66 mm; Calculation factor f1:1; r1,2 min.:1.5 mm;

Calculation factor fHC:1.02; Attainable speed for grease lubrication:43000 r/min; Static axial stiffness, preload class A:28 N/µm; da min.:28.2 mm; Da max.:43.8 mm; Preload class B GB:70 N; Preload class D GD:280 N; Static axial stiffness, preload class B:37 N/µm; Calculation factor f2B:1.02; D:47 mm;

Basic static load rating C0:116 kN; Limiting speed:8000 r/min; Basic dynamic load rating C:41.3 kN; Fw:60 mm; Reference speed:7000 r/min; Mass needle roller and cage assembly:0.077 kg; Ew:65 mm; U:30 mm; Fatigue load limit Pu:14.3 kN;

Db max.:134.4 mm; Calculation factor f0:9.6; Number of balls z:28; Calculation factor f2A:1; Preload class B GB:580 N; ra max.:1.5 mm; Fatigue load limit Pu:1.27 kN; D1:121.66 mm; Calculation factor f1:1; r1,2 min.:1.5 mm;

M:3 mm; r1 min.:0.6 mm; b1:4.6 mm; rb max.:1 mm; Specific static load factor K0:500 N/mm²; d1 ≈:57 mm; B:43 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; r2 min.:1 mm; dk:66 mm;

Da max.:505 mm; da max.:354 mm; Reference speed:800 r/min; Da min.:454 mm; rb max.:7 mm; Ca min.:10 mm; ra max.:7 mm; Basic static load rating C0:5600 kN; Db min.:510 mm; d1 ≈:416 mm;

Basic static load rating C0:116 kN; Limiting speed:8000 r/min; Basic dynamic load rating C:41.3 kN; Fw:60 mm; Reference speed:7000 r/min; Mass needle roller and cage assembly:0.077 kg; Ew:65 mm; U:30 mm; Fatigue load limit Pu:14.3 kN;

Static (Cor):22.3 mm; Pu:4250 kN; with cylindrical bore:560 min-1; Grease:7500 kN; Oil:571.310 kN; B:192 mm; d:360 mm; rs (min):5 mm; with tapered bore:700 min-1; Dynamic (Cr):12 mm;