Drilling Mud Pumps 22330 Bearings

D:1360 mm; with tapered bore:190 min-1; rs (min):15 mm; B:475 mm; Oil:2222.410 kN; Pu:18990 kN; d:750 mm; Dynamic (Cr):12 mm; Grease:36950 kN; with cylindrical bore:150 min-1;

with cylindrical bore:1 000 min-1; Static (Cor):13.9 mm; rs (min):3 mm; Grease:2180 kN; Pu:1310 kN; B:104 mm; d:190 mm; Dynamic (Cr):7.5 mm; with tapered bore:1 400 min-1; D:320 mm;

with cylindrical bore:1 000 min-1; Static (Cor):13.9 mm; rs (min):3 mm; Grease:2180 kN; Pu:1310 kN; B:104 mm; d:190 mm; Dynamic (Cr):7.5 mm; with tapered bore:1 400 min-1; D:320 mm;

D:1360 mm; with tapered bore:190 min-1; rs (min):15 mm; B:475 mm; Oil:2222.410 kN; Pu:18990 kN; d:750 mm; Dynamic (Cr):12 mm; Grease:36950 kN; with cylindrical bore:150 min-1;

Da max.:505 mm; da max.:354 mm; Reference speed:800 r/min; Da min.:454 mm; rb max.:7 mm; Ca min.:10 mm; ra max.:7 mm; Basic static load rating C0:5600 kN; Db min.:510 mm; d1 ≈:416 mm;

Weight W:0.70 lb; Dimension J:0.3125 in; Dimension S1:0.7188 in; Shaft Diameter D:3/4 in; Dimension G:0.4375 in; Dimension N:0.7813 in; Basic Static Radial Load Rating Co:1470 lbf; Dimension D2:2.1875 in; Pin Dia A1:0.2500 in; Dimension H:0.8750 in;

Calculation factor fHC:1.02; Attainable speed for grease lubrication:43000 r/min; Static axial stiffness, preload class A:28 N/µm; da min.:28.2 mm; Da max.:43.8 mm; Preload class B GB:70 N; Preload class D GD:280 N; Static axial stiffness, preload class B:37 N/µm; Calculation factor f2B:1.02; D:47 mm;

D:1360 mm; with tapered bore:190 min-1; rs (min):15 mm; B:475 mm; Oil:2222.410 kN; Pu:18990 kN; d:750 mm; Dynamic (Cr):12 mm; Grease:36950 kN; with cylindrical bore:150 min-1;

Static (Cor):22.3 mm; Pu:4250 kN; with cylindrical bore:560 min-1; Grease:7500 kN; Oil:571.310 kN; B:192 mm; d:360 mm; rs (min):5 mm; with tapered bore:700 min-1; Dynamic (Cr):12 mm;

db:100.013 mm; A1:88.9 mm; P60°:78.7 kN; Cap bolt, SAE grade:8; Bearing:22217 E; End plug (suffix Y):EPR 9; Lock washer:W 17; Cap bolt recommended tightening torque:298.3 N·m; Pa:20.5 kN; H:187.325 mm;

db:100.013 mm; A1:88.9 mm; P60°:78.7 kN; Cap bolt, SAE grade:8; Bearing:22217 E; End plug (suffix Y):EPR 9; Lock washer:W 17; Cap bolt recommended tightening torque:298.3 N·m; Pa:20.5 kN; H:187.325 mm;

Appropriate attachment bolt size G:1 in; P90°:136 kN; H:336.55 mm; Mass pillow block:94.8 kg; H1:169.875 mm; Cap bolt recommended tightening torque:203.4 N·m; R2:33.337 mm; J max.:488.95 mm; h:52.388 mm; RG:3/4 NPT;

db:100.013 mm; A1:88.9 mm; P60°:78.7 kN; Cap bolt, SAE grade:8; Bearing:22217 E; End plug (suffix Y):EPR 9; Lock washer:W 17; Cap bolt recommended tightening torque:298.3 N·m; Pa:20.5 kN; H:187.325 mm;