Bearing 1200KDH1501

Oil Speed Rating n2:9500 rpm; d:30.000 mm; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:30300 N; Fillet Radius ra:1.00 mm; D:62.0000 mm; Sealed Speed Rating n3:7000 rpm; Basic Static Radial Load Rating Co:28000 N; B:27.00 mm; Grease Speed Rating n1:7000 rpm;

Taconite seal:TER 114; da:107.95 mm; ba:46.831 mm; Cap bolt recommended tightening torque:203.4 N·m; R1:58.737 mm; Appropriate attachment bolt size G:0.875 in; End plug (suffix Y):EPR 14; H:217.488 mm; H2:44.45 mm; RG:3/8 NPT;

h:110 mm; C1 max.:20 mm; l2 max.:149 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:62 kN; B:22 mm; α:6 °; Mass rod end:0.9 kg; r1 min.:0.6 mm; dk:40.7 mm;

Mass lock washer:0.003 kg; d1:21 mm; d2:28 mm; B:1 mm; d:15 mm; f:4 mm; M:13.5 mm;

Taconite seal:TER 114; da:107.95 mm; ba:46.831 mm; Cap bolt recommended tightening torque:203.4 N·m; R1:58.737 mm; Appropriate attachment bolt size G:0.875 in; End plug (suffix Y):EPR 14; H:217.488 mm; H2:44.45 mm; RG:3/8 NPT;

Da:200 mm; P90°:107 kN; RG:3/8 NPT; A1:120.65 mm; Eye bolt:2 x 3/8-16 UNC; Labyrinth ring:2 x LOR 557; Initial grease fill:232.47 g; Cap bolt recommended tightening torque:298.3 N·m; Bearing:22222 EK; A2:165.1 mm;

B1:45 mm; d1:50.8 mm; d:55 mm; Mass adapter sleeve assembly:0.29 kg; d3:75 mm; Lock nut:KMFE 11 B; B:14 mm; G:W 55x1/19;

Mass bearing:0.074 kg; Preload class A GA:70 N; Reference grease quantity Gref:1.3 cm³; Da max.:43.8 mm; da min.:28.2 mm; D:47 mm; d:25 mm; Calculation factor fHC:1; Preload class C GC:430 N; D1:39.21 mm;

d:140 mm; rs (min):4 mm; Pu:1220 kN; Grease:1560 kN; Oil:150.170 kN; with tapered bore:1 500 min-1; B:102 mm; D:300 mm; Dynamic (Cr):7.5 mm; with cylindrical bore:1 200 min-1;

d:45 mm; a:64 mm; D:100 mm; B:39.7 mm; ra:1.5 max; rs (min):1.5 mm; Dynamic (Cr):82.479 kN; Pu:3.345 kN; Bearing designation:3309  ; Oil:5 000 min-1;

Mass bearing:0.074 kg; Preload class A GA:70 N; Reference grease quantity Gref:1.3 cm³; Da max.:43.8 mm; da min.:28.2 mm; D:47 mm; d:25 mm; Calculation factor fHC:1; Preload class C GC:430 N; D1:39.21 mm;

Taconite seal:TER 114; da:107.95 mm; ba:46.831 mm; Cap bolt recommended tightening torque:203.4 N·m; R1:58.737 mm; Appropriate attachment bolt size G:0.875 in; End plug (suffix Y):EPR 14; H:217.488 mm; H2:44.45 mm; RG:3/8 NPT;

Mass lock washer:0.003 kg; d1:21 mm; d2:28 mm; B:1 mm; d:15 mm; f:4 mm; M:13.5 mm;

Cap bolt, SAE grade:5; P180°:42.3 kN; L:349.25 mm; da:77.787 mm; H1:101.6 mm; A1:98.425 mm; Initial grease fill:141.75 g; S:4.763 mm; PG:1/8 NPT; R2:27.781 mm;

Taconite seal:TER 114; da:107.95 mm; ba:46.831 mm; Cap bolt recommended tightening torque:203.4 N·m; R1:58.737 mm; Appropriate attachment bolt size G:0.875 in; End plug (suffix Y):EPR 14; H:217.488 mm; H2:44.45 mm; RG:3/8 NPT;