Bantalan NN4930HSC3NAP5 NTN

l4 max.:128 mm; B:20 mm; G:M 24x2; C1 max.:18 mm; d:25 mm; α:7 °; Basic dynamic load rating C:72 kN; d2 max.:65 mm; Basic static load rating C0:90 kN; d4 ≈:35 mm;

Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; B:15 mm; D:27 mm; Permissible sliding velocity v min.:0.25 m/s; d:22 mm; Coefficient of friction µ max.:0.1; Tolerance shaft:h8; Tolerance housing:H7;

Bearing:22220 EK; A1:111.125 mm; Pa:13.8 kN; Ca:55.804 mm; H1:114.3 mm; Max. speed for Taconite seal:900 r/min; Cap bolt recommended tightening torque:203.4 N·m; N1:25.4 mm; R1:58.737 mm; ba:44.45 mm;

Appropriate attachment bolt size G:0.75 in; Stabilizing ring:2 x SR-1618; ba:42.069 mm; PG:1/4 NPT; Pa:11.6 kN; N1:22.225 mm; End plug (suffix Y):EPR 11; Cap bolt recommended tightening torque:515.2 N·m; L:393.7 mm; H1:120.65 mm;

d3:45 mm; G:M 25x1.5; Associated spanner (Hook spanner in accordance with DIN 1810):HN 5-6; d1:43 mm; B:20 mm; d5:44 mm; b:5 mm; h:2 mm; Recommended tightening torque:4.2 N·m; Grub (set) / Locking screw size:M 4;

Bearing:22220 EK; A1:111.125 mm; Pa:13.8 kN; Ca:55.804 mm; H1:114.3 mm; Max. speed for Taconite seal:900 r/min; Cap bolt recommended tightening torque:203.4 N·m; N1:25.4 mm; R1:58.737 mm; ba:44.45 mm;

Bearing:22220 EK; A1:111.125 mm; Pa:13.8 kN; Ca:55.804 mm; H1:114.3 mm; Max. speed for Taconite seal:900 r/min; Cap bolt recommended tightening torque:203.4 N·m; N1:25.4 mm; R1:58.737 mm; ba:44.45 mm;

A1:50.8 mm; B:3.969 mm; A3:42.875 mm; L:203.2 mm; Mass locking plate:0.39 kg; A2:36.5 mm; Hexagonal head bolts:2 x 5/8-11x1-1/4;

l4 max.:128 mm; B:20 mm; G:M 24x2; C1 max.:18 mm; d:25 mm; α:7 °; Basic dynamic load rating C:72 kN; d2 max.:65 mm; Basic static load rating C0:90 kN; d4 ≈:35 mm;

l4 max.:128 mm; B:20 mm; G:M 24x2; C1 max.:18 mm; d:25 mm; α:7 °; Basic dynamic load rating C:72 kN; d2 max.:65 mm; Basic static load rating C0:90 kN; d4 ≈:35 mm;

Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; B:15 mm; D:27 mm; Permissible sliding velocity v min.:0.25 m/s; d:22 mm; Coefficient of friction µ max.:0.1; Tolerance shaft:h8; Tolerance housing:H7;