Bantalan NN4920KC1NAP4 NTN

l4 max.:128 mm; B:20 mm; G:M 24x2; C1 max.:18 mm; d:25 mm; α:7 °; Basic dynamic load rating C:72 kN; d2 max.:65 mm; Basic static load rating C0:90 kN; d4 ≈:35 mm;

S:4.763 mm; Mass pillow block:157 kg; Max. speed for Taconite seal:410 r/min; h:54.769 mm; Taconite seal (dc shaft position):TER 148; Ca:95.809 mm; Housing:SAFS 234; Taconite seal (db shaft position):TER 161; H:360.363 mm; da:170 mm;

da max.:121 mm; Limiting speed:3000 r/min; ra max.:3 mm; Calculation factor e:0.83; rc max.:1 mm; Da max.:202.5 mm; Basic static load rating C0:930 kN; 2B:102 mm; D:215 mm; T:113 mm;

l4 max.:128 mm; B:20 mm; G:M 24x2; C1 max.:18 mm; d:25 mm; α:7 °; Basic dynamic load rating C:72 kN; d2 max.:65 mm; Basic static load rating C0:90 kN; d4 ≈:35 mm;

r3,4 min.:5 mm; Fatigue load limit Pu:2120 kN; Calculation factor kr:680; F:587 mm; D:760 mm; Basic dynamic load rating C:11700 kN; K:12 mm; Design variant/feature:BC4.10/W33WI; C:520 mm; D1 ≈:683 mm;

S:4.763 mm; Mass pillow block:157 kg; Max. speed for Taconite seal:410 r/min; h:54.769 mm; Taconite seal (dc shaft position):TER 148; Ca:95.809 mm; Housing:SAFS 234; Taconite seal (db shaft position):TER 161; H:360.363 mm; da:170 mm;

with cylindrical bore:9 400 min-1; with tapered bore:1208  ; D:80 mm; d:40 mm; Oil:7 900 min-1; Pu:6.560 kN; Static (Cor):19.880 kN; B:18 mm; Grease:0.300 kN; rs Dynamic (Cr):1.1 mm;

l4 max.:128 mm; B:20 mm; G:M 24x2; C1 max.:18 mm; d:25 mm; α:7 °; Basic dynamic load rating C:72 kN; d2 max.:65 mm; Basic static load rating C0:90 kN; d4 ≈:35 mm;

r3,4 min.:5 mm; Fatigue load limit Pu:2120 kN; Calculation factor kr:680; F:587 mm; D:760 mm; Basic dynamic load rating C:11700 kN; K:12 mm; Design variant/feature:BC4.10/W33WI; C:520 mm; D1 ≈:683 mm;

d3:45 mm; G:M 25x1.5; Associated spanner (Hook spanner in accordance with DIN 1810):HN 5-6; d1:43 mm; B:20 mm; d5:44 mm; b:5 mm; h:2 mm; Recommended tightening torque:4.2 N·m; Grub (set) / Locking screw size:M 4;

Appropriate attachment bolt size G:0.75 in; Stabilizing ring:2 x SR-1618; ba:42.069 mm; PG:1/4 NPT; Pa:11.6 kN; N1:22.225 mm; End plug (suffix Y):EPR 11; Cap bolt recommended tightening torque:515.2 N·m; L:393.7 mm; H1:120.65 mm;

d3:45 mm; G:M 25x1.5; Associated spanner (Hook spanner in accordance with DIN 1810):HN 5-6; d1:43 mm; B:20 mm; d5:44 mm; b:5 mm; h:2 mm; Recommended tightening torque:4.2 N·m; Grub (set) / Locking screw size:M 4;