Bantalan GIR 35 UK-2RS INA

Bearing limiting speed:2000 r/min; A2:311.15 mm; dc:211.137 mm; da:220 mm; Labyrinth ring (dc shaft position):LOR 170; P150°:236 kN; Eye bolt:2 x 3/8-16 UNC; Initial grease fill:2749.95 g; Ca:117.805 mm; End plug (suffix Y):EPR 24;

Basic Dynamic Radial Load Rating C:125000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Accessories:Without Accessories; B:37.00 mm; Basic Static Radial Load Rating Co:116000 N; Grease Speed Rating Open/Shielded n1:3500 rpm; D:160.0000 mm; Fillet Radius ra:2.00 mm; d:75.000 mm;

Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Mass bushing:0.026 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; d:15 mm; B:30 mm;

Mass bearing:115 kg; B:26 mm; Reference speed:190 r/min; da min.:863 mm; d:750 mm; D1:755 mm; H:90 mm; r1,2 min.:4 mm; Limiting speed:380 r/min; Fatigue load limit Pu:1000 kN;

A:15 mm; Mass withdrawal sleeve:318 kg; B1:525 mm; G:Tr 850x7; Nut for removal:HM 31/850; G2:G 1/4; Hydraulic nut:HMV 170 E; d:800 mm; d1:750 mm; G1:50 mm;

G:M 52x3; d4 ≈:70 mm; C1 max.:31 mm; Material constant KM:330; Mass rod end:4.1 kg; l3 min.:68 mm; d2 max.:114 mm; r1 min.:0.6 mm; l4 max.:254 mm; d:50 mm;

Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; b:4.6 mm; Lubricant:Regular relubricatio; Mass plain bearing:0.8 kg; Da max.:70.5 mm; dk:66 mm; Basic static load rating C0:780 kN; Design (sliding contact surface combination):Steel/steel, heavy-d; Specific static load factor K0:500 N/mm²;

D:52 mm; T:22.25 mm; C:18 mm; Limiting speed:14000 r/min; Calculation factor Y0:1.1; rb max.:1.5 mm; B:21 mm; r3,4 min.:1.5 mm; Da min.:43 mm; Basic dynamic load rating C:54.3 kN;

Specific dynamic load factor K:100 N/mm²; r1 min.:0.6 mm; b:4.6 mm; Lubricant:Regular relubricatio; Mass plain bearing:0.8 kg; Da max.:70.5 mm; dk:66 mm; Basic static load rating C0:780 kN; Design (sliding contact surface combination):Steel/steel, heavy-d; Specific static load factor K0:500 N/mm²;

Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Mass bushing:0.026 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; d:15 mm; B:30 mm;

D:52 mm; T:22.25 mm; C:18 mm; Limiting speed:14000 r/min; Calculation factor Y0:1.1; rb max.:1.5 mm; B:21 mm; r3,4 min.:1.5 mm; Da min.:43 mm; Basic dynamic load rating C:54.3 kN;

Bearing limiting speed:2000 r/min; A2:311.15 mm; dc:211.137 mm; da:220 mm; Labyrinth ring (dc shaft position):LOR 170; P150°:236 kN; Eye bolt:2 x 3/8-16 UNC; Initial grease fill:2749.95 g; Ca:117.805 mm; End plug (suffix Y):EPR 24;

A:15 mm; Mass withdrawal sleeve:318 kg; B1:525 mm; G:Tr 850x7; Nut for removal:HM 31/850; G2:G 1/4; Hydraulic nut:HMV 170 E; d:800 mm; d1:750 mm; G1:50 mm;

Cap bolt, SAE grade:8; PosiTrac Plus contact element:2 x B10724-607; H:495.3 mm; PG:1/4 NPT; Max. speed for PosiTrac Plus seal:575 r/min; Cap bolt:4 x 1 1/2-6 UNC; Ca:147.803 mm; J min.:666.75 mm; J max.:749.3 mm; A2:315.119 mm;

Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Mass bushing:0.026 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; d:15 mm; B:30 mm;