Bantalan GF 50 DO INA

Bearing limiting speed:2000 r/min; A2:311.15 mm; dc:211.137 mm; da:220 mm; Labyrinth ring (dc shaft position):LOR 170; P150°:236 kN; Eye bolt:2 x 3/8-16 UNC; Initial grease fill:2749.95 g; Ca:117.805 mm; End plug (suffix Y):EPR 24;

Pu:17.800 kN; d:75 mm; rs Dynamic (Cr):1.5 mm; with cylindrical bore:5 600 min-1; Oil:4 700 min-1; with tapered bore:2215  ; Grease:0.780 kN; D:130 mm; Static (Cor):45.530 kN; B:31 mm;

D:80 mm; D2 ≈:69.2 mm; Limiting speed:17000 r/min; da min.:44 mm; Da max.:71 mm; Reference speed:19000 r/min; B:21 mm; ra max.:1.5 mm; d1 ≈:49.56 mm; Basic dynamic load rating C:35.1 kN;

Basic Dynamic Radial Load Rating C:125000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Accessories:Without Accessories; B:37.00 mm; Basic Static Radial Load Rating Co:116000 N; Grease Speed Rating Open/Shielded n1:3500 rpm; D:160.0000 mm; Fillet Radius ra:2.00 mm; d:75.000 mm;

Pu:17.800 kN; d:75 mm; rs Dynamic (Cr):1.5 mm; with cylindrical bore:5 600 min-1; Oil:4 700 min-1; with tapered bore:2215  ; Grease:0.780 kN; D:130 mm; Static (Cor):45.530 kN; B:31 mm;

A:15 mm; Mass withdrawal sleeve:318 kg; B1:525 mm; G:Tr 850x7; Nut for removal:HM 31/850; G2:G 1/4; Hydraulic nut:HMV 170 E; d:800 mm; d1:750 mm; G1:50 mm;

Da max.:148 mm; b:6 mm; da min.:83 mm; B2 ≈:49 mm; Fatigue load limit Pu:34.5 kN; d1:70 mm; D:160 mm; Calculation factor Y1:3; D1 ≈:133 mm; Calculation factor Y0:2.8;

G:M 52x3; d4 ≈:70 mm; C1 max.:31 mm; Material constant KM:330; Mass rod end:4.1 kg; l3 min.:68 mm; d2 max.:114 mm; r1 min.:0.6 mm; l4 max.:254 mm; d:50 mm;

Pu:17.800 kN; d:75 mm; rs Dynamic (Cr):1.5 mm; with cylindrical bore:5 600 min-1; Oil:4 700 min-1; with tapered bore:2215  ; Grease:0.780 kN; D:130 mm; Static (Cor):45.530 kN; B:31 mm;

Pu:17.800 kN; d:75 mm; rs Dynamic (Cr):1.5 mm; with cylindrical bore:5 600 min-1; Oil:4 700 min-1; with tapered bore:2215  ; Grease:0.780 kN; D:130 mm; Static (Cor):45.530 kN; B:31 mm;

Dimension N:0.7813 in; Dimension S1:1.0000 in; Dimension L:4.8125 in; Basic Dynamic Radial Load Rating:5730 lbf; Dimension C:3.5000 in; Dimension H:1.1563 in; Insert Bearing IB:ZMaRC; Dimension G:0.3750 in; Dimension J:1.6250 in; Pin Dia A1:0.5313 in;

A:15 mm; Mass withdrawal sleeve:318 kg; B1:525 mm; G:Tr 850x7; Nut for removal:HM 31/850; G2:G 1/4; Hydraulic nut:HMV 170 E; d:800 mm; d1:750 mm; G1:50 mm;

Bearing limiting speed:2000 r/min; A2:311.15 mm; dc:211.137 mm; da:220 mm; Labyrinth ring (dc shaft position):LOR 170; P150°:236 kN; Eye bolt:2 x 3/8-16 UNC; Initial grease fill:2749.95 g; Ca:117.805 mm; End plug (suffix Y):EPR 24;

Cap bolt, SAE grade:8; PosiTrac Plus contact element:2 x B10724-607; H:495.3 mm; PG:1/4 NPT; Max. speed for PosiTrac Plus seal:575 r/min; Cap bolt:4 x 1 1/2-6 UNC; Ca:147.803 mm; J min.:666.75 mm; J max.:749.3 mm; A2:315.119 mm;

Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Mass bushing:0.026 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; d:15 mm; B:30 mm;