Bantalan 636HZZ AST

d:70 mm; Mass inner ring:0.31 kg; B:35 mm; r, r1,2 min.:1 mm; F:80 mm;

A5:42.069 mm; A:84.138 mm; Mass bearing unit:18.2 kg; A6:28.575 mm; N1:20.637 mm; Basic dynamic load rating C:325 kN; Limiting speed:2300 r/min; Attachment bolt diameter G:4 x 19.05; s:36.513 mm; S:0.794 mm;

Fillet Radius ra:1.00 mm; B:32.00 mm; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:40300 N; Basic Static Radial Load Rating Co:40500 N; D:80.0000 mm; Grease Speed Rating n1:6800 rpm; Oil Speed Rating n2:8000 rpm; d:50.000 mm;

d:140 mm; da max.:159 mm; Basic dynamic load rating C:691 kN; rb max.:3 mm; Calculation factor Y:1.4; Ca min.:8 mm; r3,4 min.:3 mm; Mass bearing:14.2 kg; r1,2 min.:4 mm; Basic static load rating C0:1000 kN;

d:70 mm; Mass inner ring:0.31 kg; B:35 mm; r, r1,2 min.:1 mm; F:80 mm;

Nut for removal:HM 3172; A:9 mm; Hydraulic nut:HMV 72 E; B2:288 mm; B1:269 mm; Mass withdrawal sleeve:25.5 kg; d:340 mm; G:Tr 360x5; d1:320 mm; G2:G 1/4;

α:124 °; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:2.54 kg; Coefficient of friction µ min.:0.08; B:80 mm; a:4 mm; D:125 mm; Permissible sliding velocity v min.:0 m/s; d:105 mm; Coefficient of friction µ max.:0.15;

α:124 °; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:2.54 kg; Coefficient of friction µ min.:0.08; B:80 mm; a:4 mm; D:125 mm; Permissible sliding velocity v min.:0 m/s; d:105 mm; Coefficient of friction µ max.:0.15;

Cap bolt recommended tightening torque:149.1 N·m; Adapter sleeve assembly:SNW 18x3.1/8; RG:3/8 NPT; Bearing limiting speed:5300 r/min; Labyrinth ring:2 x LOR 189; R2:27.781 mm; Mass pillow block:21.4 kg; J min.:260.35 mm; End plug (suffix Y):EPR 11; H1:101.6 mm;

d:140 mm; da max.:159 mm; Basic dynamic load rating C:691 kN; rb max.:3 mm; Calculation factor Y:1.4; Ca min.:8 mm; r3,4 min.:3 mm; Mass bearing:14.2 kg; r1,2 min.:4 mm; Basic static load rating C0:1000 kN;

rb max.:0.6 mm; Calculation factor Y2:0.87; Calculation factor A:0.000656; Calculation factor X:0.41; Reference speed:17000 r/min; r3,4 min.:0.6 mm; D1 ≈:41.66 mm; d1 ≈:35.8 mm; a:16 mm; Basic dynamic load rating C:18 kN;

d:70 mm; Mass inner ring:0.31 kg; B:35 mm; r, r1,2 min.:1 mm; F:80 mm;

d:70 mm; Mass inner ring:0.31 kg; B:35 mm; r, r1,2 min.:1 mm; F:80 mm;

d:55.2 mm; Pu:3.564 kN; D:78 mm; Static (Coa):78.4 kN; Dynamic (Ca):34.8 kN; Grease:3 200 min-1; Oil:4 200 min-1; B:11.6 mm;