Bantalan 6348 KOYO

d:70 mm; Mass inner ring:0.31 kg; B:35 mm; r, r1,2 min.:1 mm; F:80 mm;

P150°:136 kN; H1:200.025 mm; Bearing limiting speed:2400 r/min; Mass pillow block:223 kg; P60°:416 kN; Da:339.999 mm; PG:1/4 NPT; h:61.913 mm; Ca:101.803 mm; End plug (suffix Y):EPR 21;

Grease Speed Rating Open/Shielded n1:9000 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm; D:75.0000 mm; B:16.00 mm; Basic Dynamic Radial Load Rating C:23400 N; Basic Static Radial Load Rating Co:16600 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:5600 rpm; d:45.000 mm; Accessories:One Shield & Snap-Ri;

A5:42.069 mm; A:84.138 mm; Mass bearing unit:18.2 kg; A6:28.575 mm; N1:20.637 mm; Basic dynamic load rating C:325 kN; Limiting speed:2300 r/min; Attachment bolt diameter G:4 x 19.05; s:36.513 mm; S:0.794 mm;

rb max.:0.6 mm; Calculation factor Y2:0.87; Calculation factor A:0.000656; Calculation factor X:0.41; Reference speed:17000 r/min; r3,4 min.:0.6 mm; D1 ≈:41.66 mm; d1 ≈:35.8 mm; a:16 mm; Basic dynamic load rating C:18 kN;

Nut for removal:HM 3172; A:9 mm; Hydraulic nut:HMV 72 E; B2:288 mm; B1:269 mm; Mass withdrawal sleeve:25.5 kg; d:340 mm; G:Tr 360x5; d1:320 mm; G2:G 1/4;

d:55.2 mm; Pu:3.564 kN; D:78 mm; Static (Coa):78.4 kN; Dynamic (Ca):34.8 kN; Grease:3 200 min-1; Oil:4 200 min-1; B:11.6 mm;

P150°:136 kN; H1:200.025 mm; Bearing limiting speed:2400 r/min; Mass pillow block:223 kg; P60°:416 kN; Da:339.999 mm; PG:1/4 NPT; h:61.913 mm; Ca:101.803 mm; End plug (suffix Y):EPR 21;

Nut for removal:HM 3172; A:9 mm; Hydraulic nut:HMV 72 E; B2:288 mm; B1:269 mm; Mass withdrawal sleeve:25.5 kg; d:340 mm; G:Tr 360x5; d1:320 mm; G2:G 1/4;

d:55.2 mm; Pu:3.564 kN; D:78 mm; Static (Coa):78.4 kN; Dynamic (Ca):34.8 kN; Grease:3 200 min-1; Oil:4 200 min-1; B:11.6 mm;

d:55.2 mm; Pu:3.564 kN; D:78 mm; Static (Coa):78.4 kN; Dynamic (Ca):34.8 kN; Grease:3 200 min-1; Oil:4 200 min-1; B:11.6 mm;

d:70 mm; Mass inner ring:0.31 kg; B:35 mm; r, r1,2 min.:1 mm; F:80 mm;

P150°:1900 kN; Bearing (basic designation):23160 K; Ca:180 mm; Locating ring:2 x FRB 10/500; N4 max.:25 mm; Eye bolt, size:2 x M 30; Q180°:1430 kN; Mass housing:301 kg; Appropriate attachment bolt, size G:36 mm; Cap bolt, rec. tightening torque:400 N·m;

Fillet Radius ra:1.00 mm; B:32.00 mm; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:40300 N; Basic Static Radial Load Rating Co:40500 N; D:80.0000 mm; Grease Speed Rating n1:6800 rpm; Oil Speed Rating n2:8000 rpm; d:50.000 mm;

P150°:1900 kN; Bearing (basic designation):23160 K; Ca:180 mm; Locating ring:2 x FRB 10/500; N4 max.:25 mm; Eye bolt, size:2 x M 30; Q180°:1430 kN; Mass housing:301 kg; Appropriate attachment bolt, size G:36 mm; Cap bolt, rec. tightening torque:400 N·m;