Bantalan FRW3ZZ AST

P150°:30.7 kN; Housing:FSAF 316; H1:107.95 mm; J1:53.975 mm; P120°:33.8 kN; J max.:320.675 mm; P90°:55.6 kN; P180°:36.9 kN; Pa:23.6 kN; Cap bolt, SAE grade:8;

Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:224 kN; d:45 mm; l7 min.:55 mm; d4 ≈:65 mm; r1 min.:0.6 mm; dk:60 mm; h1:165 mm; Basic dynamic load rating C:127 kN; l4 max.:219 mm;

B4:15.9 mm; G:64.719 mm; d:65 mm; Sleeve:S 113x2.1/8; d1:53.975 mm; B1:70.129 mm; B:14.554 mm; Hydraulic nut:HMVC 13E; d3 max.:85.852 mm; Lock washer:W 13;

d:110 mm; Dynamic (Cr):4.5 mm; with cylindrical bore:2 000 min-1; Oil:69.820 kN; Static (Cor):8.3 mm; Pu:488 kN; with tapered bore:2 800 min-1; B:53 mm; rs (min):2.1 mm; Grease:653 kN;

d3:630 mm; Lock washer / Locking clip:MS 31/500; Associated spanner:TMFN 500-600; d1:580 mm; b:40 mm; Associated eyebolt for handling:M 10; G:Tr 500x5; B5:100 mm; h:23 mm; d2:540 mm;

d:260 mm; Calculation factor kr:0; Fatigue load limit Pu:465 kN; Design variant/feature:BC4.1/WO; F:292 mm; r3,4 min.:3 mm; Mass bearing:77.2 kg; Basic dynamic load rating C:2330 kN; D1 ≈:332 mm; s:3 mm;

da min.:66 mm; D:95 mm; Db max.:91 mm; s max.:2 mm; das:68.9 mm; d1 ≈:71 mm; D1 ≈:82 mm; E:86.74 mm; Reference speed:3400 r/min; Basic static load rating C0:146 kN;

d3:630 mm; Lock washer / Locking clip:MS 31/500; Associated spanner:TMFN 500-600; d1:580 mm; b:40 mm; Associated eyebolt for handling:M 10; G:Tr 500x5; B5:100 mm; h:23 mm; d2:540 mm;

B:15.5 mm; Mass shaft washer:3.65 kg; d1:347 mm; d:280 mm; r1,2 min.:1.5 mm;

Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:224 kN; d:45 mm; l7 min.:55 mm; d4 ≈:65 mm; r1 min.:0.6 mm; dk:60 mm; h1:165 mm; Basic dynamic load rating C:127 kN; l4 max.:219 mm;

db min.:105 mm; da max.:103 mm; d1 ≈:112 mm; Calculation factor e:0.35; Ca min.:4 mm; r3,4 min.:1.5 mm; Basic static load rating C0:173 kN; ra max.:1.5 mm; T:23 mm; d:95 mm;

d3:630 mm; Lock washer / Locking clip:MS 31/500; Associated spanner:TMFN 500-600; d1:580 mm; b:40 mm; Associated eyebolt for handling:M 10; G:Tr 500x5; B5:100 mm; h:23 mm; d2:540 mm;

d:60 mm; B1:6 mm; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ max.:0.1; Mass bushing:0.52 kg; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; D:72 mm; B:60 mm;

P150°:30.7 kN; Housing:FSAF 316; H1:107.95 mm; J1:53.975 mm; P120°:33.8 kN; J max.:320.675 mm; P90°:55.6 kN; P180°:36.9 kN; Pa:23.6 kN; Cap bolt, SAE grade:8;

d:110 mm; Dynamic (Cr):4.5 mm; with cylindrical bore:2 000 min-1; Oil:69.820 kN; Static (Cor):8.3 mm; Pu:488 kN; with tapered bore:2 800 min-1; B:53 mm; rs (min):2.1 mm; Grease:653 kN;