Bantalan 33021F Fersa

r1,2 min.:1.1 mm; d:366 mm; Basic dynamic load rating C:296 kN; da min.:409 mm; Mass bearing (including seat washer where applicable):19.5 kg; Basic static load rating C0:1460 kN; D1 ≈:370 mm; Limiting speed:110 r/min; Fatigue load limit Pu:27 kN; D:440 mm;

Speed Rating-Open and Shielded-Oil OSO:14000 rpm; Width - Inner Ring B1:25.40 mm; Basic Radial Load Rating-Dynamic DC:20800 N; Fillet Radius ra:1.00 mm; Accessories:300SWI Non-Filling N; Basic Radial Load Rating-Static SCO:11200 N; D:62.0000 mm; d:25.000 mm; Width - Outer Ring B0:17.0 mm; Speed Rating-Open and Shielded-Grease OSG:11000 rpm;

Da:1070 max; rs:5 mm; D:1090 mm; Pu:22.047 kN; Static (Cor):1530.000 kN; ra:4 max; d:900 mm; Weight:165 kg; Oil:450 min-1; Bearing designation:618/900MA  ;

Locking device:MB 6; d3:45 mm; Mass adapter sleeve assembly:0.12 kg; d1:23.813 mm; B1:31 mm; B:7 mm; Lock nut:KM 6; G:M 30x1.5; B4:8 mm; d:30 mm;

Sealed Speed Rating n3:2200 rpm; Basic Static Radial Load Rating Co:80000 N; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:85200 N; Accessories:Without Accessories; D:180.0000 mm; Oil Speed Rating Open/Shielded n2:4000 rpm; Fillet Radius ra:2.00 mm; B:28.00 mm; d:120.000 mm;

r1,2 min.:1.1 mm; d:366 mm; Basic dynamic load rating C:296 kN; da min.:409 mm; Mass bearing (including seat washer where applicable):19.5 kg; Basic static load rating C0:1460 kN; D1 ≈:370 mm; Limiting speed:110 r/min; Fatigue load limit Pu:27 kN; D:440 mm;

Taconite seal (dc shaft position):TER 46; S:3.175 mm; db:87.313 mm; Mass pillow block:14.5 kg; Max. speed for Taconite seal:900 r/min; P120°:28.5 kN; da:75 mm; R2:21.431 mm; End plug (suffix Y):EPR 8; Cap bolt recommended tightening torque:149.1 N·m;

N1:19.05 mm; Initial grease fill:68.04 g; h:36.513 mm; PG:1/8 NPT; End plug (suffix Y):EPR 5; Ca:52.807 mm; A1:79.375 mm; Adapter sleeve assembly:SNW 111x1.15/16; P150°:14.7 kN; S:4.763 mm;

Taconite seal (dc shaft position):TER 46; S:3.175 mm; db:87.313 mm; Mass pillow block:14.5 kg; Max. speed for Taconite seal:900 r/min; P120°:28.5 kN; da:75 mm; R2:21.431 mm; End plug (suffix Y):EPR 8; Cap bolt recommended tightening torque:149.1 N·m;

D:72.0000 mm; d:35.000 mm; Oil Speed Rating n2:8000 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:37700 N; B:30.20 mm; Basic Static Radial Load Rating Co:27500 N; Grease Speed Rating n1:6000 rpm;

Taconite seal (dc shaft position):TER 46; S:3.175 mm; db:87.313 mm; Mass pillow block:14.5 kg; Max. speed for Taconite seal:900 r/min; P120°:28.5 kN; da:75 mm; R2:21.431 mm; End plug (suffix Y):EPR 8; Cap bolt recommended tightening torque:149.1 N·m;

PosiTrac Plus contact element (dc shaft position):B10724-184; P120°:32 kN; P180°:34.7 kN; Cap bolt:2 x 3/4-10 UNC; db:92.075 mm; R2:26.988 mm; Ca:67.793 mm; Appropriate attachment bolt size G:0.75 in; End plug (suffix Y):EPR 10; Pa:22.2 kN;

Basic Dynamic Radial Load Rating C:153000 N; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:2800 rpm; d:70.000 mm; Fillet Radius ra:2.00 mm; B:66.70 mm; Accessories:Two Shields; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:125000 N; D:150.0000 mm;

l:18 mm; Limiting speed:7500 r/min; Calculation factor Y0:1.6; b:10 mm; Cb min.:5.5 mm; Basic static load rating C0:200 kN; Fatigue load limit Pu:22.8 kN; Db min.:85 mm; Calculation factor Y1:1.6; Mass bearing pair:1.52 kg;