Bantalan 239/630-MB-W33 NKE

D:190.0000 mm; Basic Static Radial Load Rating Co:71000 N; d:140.000 mm; Sealed Speed Rating n3:2000 rpm; Oil Speed Rating Open/Shielded n2:3800 rpm; Accessories:One Shield; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:3200 rpm; Basic Dynamic Radial Load Rating C:66300 N; B:24.00 mm;

Basic static load rating C0:7.8 kN; RG:1/4-28 UNF; A1:12 mm; L:70 mm; End cover:ECY 205; T:42.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4 N·m; s1:23.5 mm; Bearing:YET 205-014;

Basic static load rating C0:7.8 kN; RG:1/4-28 UNF; A1:12 mm; L:70 mm; End cover:ECY 205; T:42.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4 N·m; s1:23.5 mm; Bearing:YET 205-014;

Basic Static Radial Load Rating Co:850000 N; Fillet Radius rb:1.00 mm; d:160.000 mm; Grease Speed Rating n1:1200 rpm; B:136.00 mm; Fillet Radius ra:3.00 mm; D:340.0000 mm; Oil Speed Rating n2:1600 rpm; Basic Dynamic Radial Load Rating C:553000 N;

Basic static load rating C0:7.8 kN; RG:1/4-28 UNF; A1:12 mm; L:70 mm; End cover:ECY 205; T:42.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4 N·m; s1:23.5 mm; Bearing:YET 205-014;

Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1700 rpm; Basic Static Radial Load Rating Co:965000 N; Fillet Radius ra:3.00 mm; D:360.0000 mm; B:116.00 mm; Basic Dynamic Radial Load Rating C:572000 N; Grease Speed Rating n1:1300 rpm; d:200.000 mm;

Basic Dynamic Radial Load Rating C:21200 N; d:30.000 mm; Grease Speed Rating n1:8500 rpm; B:16.00 mm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:12700 N; Oil Speed Rating n2:12000 rpm;

Diameter E:98.9 mm; Width - Inner Ring B1:68.26 mm; D:160.0000 mm; Speed Rating-Open and Shielded-Oil OSO:5000 rpm; Width - Outer Ring B0:37.0 mm; Speed Rating-Open and Shielded-Grease OSG:4300 rpm; Basic Radial Load Rating-Dynamic DC:121000 N; d:75.000 mm; Basic Radial Load Rating-Static SCO:85000 N; Fillet Radius ra:2.00 mm;

Fatigue load limit Pu:0.153 kN; Basic static load rating C0:1.53 kN; Ew:5 mm; Reference speed:40000 r/min; Basic dynamic load rating C:1.68 kN; U:9 mm; Limiting speed:45000 r/min; Mass needle roller and cage assembly:0.0004 kg; Fw:3 mm;

PosiTrac Plus contact element:2 x B10724-188; J1:57.15 mm; PG:1/4 NPT; H1:120.65 mm; Stabilizing ring:2 x SR-1618; Mass pillow block:41.1 kg; Da:190 mm; End plug (suffix Y):EPR 11; h:50.8 mm; Appropriate attachment bolt size G:0.75 in;

PosiTrac Plus contact element:2 x B10724-188; J1:57.15 mm; PG:1/4 NPT; H1:120.65 mm; Stabilizing ring:2 x SR-1618; Mass pillow block:41.1 kg; Da:190 mm; End plug (suffix Y):EPR 11; h:50.8 mm; Appropriate attachment bolt size G:0.75 in;

Diameter E:98.9 mm; Width - Inner Ring B1:68.26 mm; D:160.0000 mm; Speed Rating-Open and Shielded-Oil OSO:5000 rpm; Width - Outer Ring B0:37.0 mm; Speed Rating-Open and Shielded-Grease OSG:4300 rpm; Basic Radial Load Rating-Dynamic DC:121000 N; d:75.000 mm; Basic Radial Load Rating-Static SCO:85000 N; Fillet Radius ra:2.00 mm;

D:60 mm; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.2 kg; D1:70 mm; B1:6 mm; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s;

da:90 mm; Taconite seal (db shaft position):TER 112; R1:73.025 mm; Max. speed for Taconite seal:750 r/min; Lock washer:W 18; Pa:35.1 kN; Cap bolt:2 x 3/4-10 UNC; P60°:128 kN; Bearing:1318; P150°:44.5 kN;