Bearing 29452EJ

L:234.95 mm; A1:88.9 mm; H1:69.85 mm; Limiting speed:1100 r/min; S:0.794 mm; H2:44.45 mm; J max.:196.85 mm; A:68.263 mm; da:61.913 mm; Mass bearing unit:7.26 kg;

Calculation factor Y0:1.1; r1,2 min.:1.5 mm; Calculation factor Y:2; Cb min.:6.5 mm; Limiting speed:4800 r/min; Da min.:118 mm; db min.:95 mm; T:36 mm; Ca min.:6 mm; Fatigue load limit Pu:34.5 kN;

Basic Static Radial Load Rating Co:16000 N; Grease Speed Rating Open/Shielded n1:6700 rpm; d:65.000 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:4300 rpm; D:90.0000 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Basic Dynamic Radial Load Rating C:17400 N; Accessories:Two Seals; B:13.00 mm;

D1:32 mm; D:47 mm; d1:47 mm; Pu:1.810 kN; Oil:6 700 min-1; static Cor:39.900 kN; Grease:5 000 min-1; d:30 mm; H:11 mm; rs (min):0.6 mm;

Recommended diameter for attachment bolts, inch G:0.5625 in; A3:3.2 mm; N4:2 mm; Hexagonal key size for grub screw N:3.969 mm; Db1:102 mm; d:42.862 mm; A5:23 mm; End cover:ECY 209; J:148.5 mm; Basic static load rating C0:21.6 kN;

L:234.95 mm; A1:88.9 mm; H1:69.85 mm; Limiting speed:1100 r/min; S:0.794 mm; H2:44.45 mm; J max.:196.85 mm; A:68.263 mm; da:61.913 mm; Mass bearing unit:7.26 kg;

Oil Speed Rating Open/Shielded n2:1300 rpm; Fillet Radius ra:2.00 mm; D:480.0000 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; Basic Dynamic Radial Load Rating C:242000 N; B:46.00 mm; Basic Static Radial Load Rating Co:365000 N; Sealed Speed Rating n3:0 rpm; d:380.000 mm; Accessories:One Shield;

Cap bolt:7/8-9 UNC; Housing:SSAFS 530; PosiTrac Plus contact element:2 x B10724-125; A1:158.75 mm; Initial grease fill:623.7 g; P180°:162 kN; h:50.8 mm; da:130.175 mm; Bearing:22230 CCK/W33; S:4.763 mm;

D1:32 mm; D:47 mm; d1:47 mm; Pu:1.810 kN; Oil:6 700 min-1; static Cor:39.900 kN; Grease:5 000 min-1; d:30 mm; H:11 mm; rs (min):0.6 mm;

L:234.95 mm; A1:88.9 mm; H1:69.85 mm; Limiting speed:1100 r/min; S:0.794 mm; H2:44.45 mm; J max.:196.85 mm; A:68.263 mm; da:61.913 mm; Mass bearing unit:7.26 kg;

Cap bolt:7/8-9 UNC; Housing:SSAFS 530; PosiTrac Plus contact element:2 x B10724-125; A1:158.75 mm; Initial grease fill:623.7 g; P180°:162 kN; h:50.8 mm; da:130.175 mm; Bearing:22230 CCK/W33; S:4.763 mm;

r, r1,2 min.:1 mm; B:25 mm; d:60 mm; F:70 mm; Mass inner ring:0.2 kg;

rs (min):2.5 mm; Dynamic (Ca):121 kN; Static (Coa):141 kN; C:23 mm; a:23 mm; Pu:17.200 kN; d2:50 mm; D:110 mm; T:29.25 mm; B:27 mm;

rs (min):2.5 mm; Dynamic (Ca):121 kN; Static (Coa):141 kN; C:23 mm; a:23 mm; Pu:17.200 kN; d2:50 mm; D:110 mm; T:29.25 mm; B:27 mm;