Bearing 120TPS153

L:511.175 mm; A2:261.938 mm; Housing:SAF 034 KA; R2:38.1 mm; Cap bolt recommended tightening torque:400 N·m; h:43.656 mm; P90°:149 kN; Ca:86.614 mm; R1:87.313 mm; PG:1/4 NPT;

Accessories:Two Shields & Snap-R; d:25.000 mm; B:21.00 mm; Fillet Radius ra:1.50 mm; D:80.0000 mm; Grease Speed Rating Open/Shielded n1:7700 rpm; Oil Speed Rating Open/Shielded n2:9400 rpm; Basic Static Radial Load Rating Co:23600 N; Basic Dynamic Radial Load Rating C:35800 N;

Basic Static Radial Load Rating Co:11800 N; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:16800 N; d:38.100 mm; Fillet Radius ra:0.79 mm; Width Plain B:11.1 mm; D:66.7000 mm; Shielded or Sealed B1:14.3 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm;

B:40 mm; Mass locking clip:0.19 kg; M3:22 mm; Hexagonal head bolt:M 20x40; M1:7 mm; M2:51 mm; M:21 mm; Spring washer in accordance with DIN 128:A 20;

Basic dynamic load rating C:30 kN; Specific dynamic load factor K:100 N/mm²; B:16 mm; r1 min.:0.3 mm; da min.:22.1 mm; Da max.:33.2 mm; rb max.:0.3 mm; b1:3.1 mm; Material constant KM:330; r2 min.:0.3 mm;

T:700 mm; d:680 mm; Mass bearing:1625 kg; Thrust factor K:1.85; r1,2 min.:3 mm; d1 ≈:728 mm; B:700 mm; Fatigue load limit Pu:3400 kN; Calculation factor e:0.31; Comparative radial load rating CF:4900 kN;

N:32 mm; J7:44 mm; A1:120 mm; Locating ring:2 x FRB 17,5/200; N:32 mm; Ca:80 mm; Appropriate attachment bolt, rec. tightening torque:665 N·m; Cap bolt, rec. tightening torque:200 N·m; P120°:310 kN; Adapter sleeve:H 319;

L:950 mm; A1:360 mm; Bearing (basic designation):22264; ATS:410 mm; s:24 mm; Mass housing:420 kg; H2:120 mm; J6:880 mm; Cap bolt, size:M 36x240; ATK:528 mm;

Da max.:159.5 mm; T:76 mm; Fatigue load limit Pu:80 kN; D:170 mm; b:10 mm; d:110 mm; Mass bearing pair:6.32 kg; Basic dynamic load rating C:494 kN; r5 min.:0.6 mm; Da min.:152 mm;

N:32 mm; J7:44 mm; A1:120 mm; Locating ring:2 x FRB 17,5/200; N:32 mm; Ca:80 mm; Appropriate attachment bolt, rec. tightening torque:665 N·m; Cap bolt, rec. tightening torque:200 N·m; P120°:310 kN; Adapter sleeve:H 319;

Da max.:582 mm; D1 ≈:544 mm; Mass bearing:64 kg; Calculation factor Y2:1.07; a:364 mm; Calculation factor X:0.6; Calculation factor A:9.53; Calculation factor e:0.95; Fatigue load limit Pu:35.5 kN; b:12.5 mm;

Hydraulic nut:HMVC 30E; Lock nut:N 030; Sleeve:S 3030x5.1/8; Mass adapter sleeve assembly:4.45 kg; d1:130.175 mm; G:149.555 mm; Threads per inch:12; Lock washer:W 030; B1:88.443 mm; B:24.867 mm;

Da max.:159.5 mm; T:76 mm; Fatigue load limit Pu:80 kN; D:170 mm; b:10 mm; d:110 mm; Mass bearing pair:6.32 kg; Basic dynamic load rating C:494 kN; r5 min.:0.6 mm; Da min.:152 mm;

L:950 mm; A1:360 mm; Bearing (basic designation):22264; ATS:410 mm; s:24 mm; Mass housing:420 kg; H2:120 mm; J6:880 mm; Cap bolt, size:M 36x240; ATK:528 mm;