Bearing 230/670CAE4

Basic Radial Load Rating-Dynamic DC:296000 N; Fillet Radius ra:3.00 mm; D:280.0000 mm; Speed Rating-Open and Shielded-Grease OSG:5300 rpm; Fillet Radius rb:1.00 mm; B:58.00 mm; Speed Rating-Open and Shielded-Oil OSO:7800 rpm; Type:300-RDM Series (from; Basic Radial Load Rating-Static SCO:345000 N; d:130.000 mm;

Basic Static Radial Load Rating Co:53000 N; Grease Speed Rating n1:4500 rpm; Fillet Radius ra:1.50 mm; D:100.0000 mm; Sealed Speed Rating n3:4500 rpm; Basic Dynamic Radial Load Rating C:72800 N; d:45.000 mm; Oil Speed Rating n2:6000 rpm; Accessories:One Seal & Snap-Ring; B:39.70 mm;

Basic Radial Load Rating-Dynamic DC:296000 N; Fillet Radius ra:3.00 mm; D:280.0000 mm; Speed Rating-Open and Shielded-Grease OSG:5300 rpm; Fillet Radius rb:1.00 mm; B:58.00 mm; Speed Rating-Open and Shielded-Oil OSO:7800 rpm; Type:300-RDM Series (from; Basic Radial Load Rating-Static SCO:345000 N; d:130.000 mm;

J min.:571.5 mm; L:749.3 mm; R2:46.038 mm; h:63.5 mm; Labyrinth ring:2 x LOR 158; Adapter sleeve assembly:SNW 140x7.1/8; H1:209.55 mm; N1:34.925 mm; P180°:145 kN; P150°:120 kN;

Basic Radial Load Rating-Dynamic DC:296000 N; Fillet Radius ra:3.00 mm; D:280.0000 mm; Speed Rating-Open and Shielded-Grease OSG:5300 rpm; Fillet Radius rb:1.00 mm; B:58.00 mm; Speed Rating-Open and Shielded-Oil OSO:7800 rpm; Type:300-RDM Series (from; Basic Radial Load Rating-Static SCO:345000 N; d:130.000 mm;

B4:16.916 mm; Lock nut:AN 16; Sleeve:S 16x2.5/8; d3 max.:105.689 mm; G:79.68 mm; B1:60.096 mm; B:15.342 mm; Mass adapter sleeve assembly:1.1 kg; d1:66.675 mm; Lock washer:W 16;

B4:16.916 mm; Lock nut:AN 16; Sleeve:S 16x2.5/8; d3 max.:105.689 mm; G:79.68 mm; B1:60.096 mm; B:15.342 mm; Mass adapter sleeve assembly:1.1 kg; d1:66.675 mm; Lock washer:W 16;

J min.:571.5 mm; L:749.3 mm; R2:46.038 mm; h:63.5 mm; Labyrinth ring:2 x LOR 158; Adapter sleeve assembly:SNW 140x7.1/8; H1:209.55 mm; N1:34.925 mm; P180°:145 kN; P150°:120 kN;

das:1033 mm; d:950 mm; s max.:14 mm; Db max.:1222 mm; B:175 mm; Mass bearing:565 kg; Da max.:1222 mm; Limiting speed:200 r/min; Reference speed:160 r/min; ra max.:6 mm;

PG:1/4 NPT; Initial grease fill:181.44 g; A2:224.638 mm; P90°:84.5 kN; L:387.35 mm; da:87.313 mm; h:42.069 mm; ba:44.45 mm; Adapter sleeve assembly:SNW 20x3.7/16; H:222.25 mm;

PG:1/4 NPT; Initial grease fill:181.44 g; A2:224.638 mm; P90°:84.5 kN; L:387.35 mm; da:87.313 mm; h:42.069 mm; ba:44.45 mm; Adapter sleeve assembly:SNW 20x3.7/16; H:222.25 mm;

H2:44.45 mm; Ca:55.804 mm; Bearing:23024 CCK/W33; A1:111.125 mm; J1:60.325 mm; P90°:71.2 kN; ba:46.831 mm; Adapter sleeve assembly:SNW 3024x4.1/8; P180°:48.9 kN; Cap bolt, SAE grade:5;

Limiting speed:4300 r/min; Calculation factor Y:1.8; Db min.:140 mm; r1,2 min.:7 mm; da max.:101 mm; D:147 mm; Mass bearing:2.54 kg; B:40 mm; Cb min.:7.5 mm; d:90 mm;

Limiting speed:4300 r/min; Calculation factor Y:1.8; Db min.:140 mm; r1,2 min.:7 mm; da max.:101 mm; D:147 mm; Mass bearing:2.54 kg; B:40 mm; Cb min.:7.5 mm; d:90 mm;

B4:16.916 mm; Lock nut:AN 16; Sleeve:S 16x2.5/8; d3 max.:105.689 mm; G:79.68 mm; B1:60.096 mm; B:15.342 mm; Mass adapter sleeve assembly:1.1 kg; d1:66.675 mm; Lock washer:W 16;